---

RFQ for Turkey, 50 HZ



We have an active requirement from our end user for a Siemens SGT-300-1S Gas Turbine Generator Set, approximately 8 MW, for power generation.



Please check whether you can offer a suitable unit and provide your complete technical and commercial proposal.



The most important point is the fuel system configuration.



The customer requires a genuine dual-fuel system. We are not referring to single-shaft / twin-shaft configuration.



By dual-fuel, we specifically mean a turbine equipped to operate on both:



Gaseous fuel

Liquid fuel / diesel

Please confirm whether the offered unit has two independent fuel trains / fuel supply systems for gaseous and liquid fuel, including the corresponding pumps, filters, heaters, valves, injectors/nozzles and control equipment as applicable.



Please also confirm whether the control system allows automatic or manual switching between gaseous fuel and liquid fuel.



In addition, please clarify the following:



Exact model and configuration

Siemens SGT-300-1S?

Single-shaft configuration?

Power generation application?

Rated electrical output?

Generator voltage and frequency?

Dual-Fuel System – VERY IMPORTANT

Is the turbine genuinely dual-fuel?

Can it operate on both natural gas and diesel?

Are both gas and liquid-fuel systems physically installed on the offered unit?

Are there two independent fuel lines/trains?

Are the required pumps, filters, heaters, valves and fuel injectors/nozzles included?

Can the turbine switch between gas and diesel during operation?

Is switching automatic, manual, or both?

Please provide the fuel system P&ID, technical description or OEM documentation confirming this configuration.

APG / Associated Petroleum Gas

The end user intends to use Associated Petroleum Gas (APG).



Please confirm whether the offered turbine can operate on APG.



If yes, please provide:



Required gas composition

Minimum/maximum LHV

Gas pressure requirement

Permissible H2S content

Permissible liquids/moisture

Other fuel quality limitations

Whether any modification or additional gas-conditioning equipment is required

Equipment Location

Please confirm the exact current location of the turbine:



Country

City

Site / warehouse

Is the equipment currently located in Turkey, China, Europe or another country?



Inspection Before Contract

Our customer may require a physical inspection before concluding the final purchase contract.



Please confirm:



Where can the inspection be performed?

Can our customers technical representatives visit the unit?

Can the turbine, generator, auxiliary systems and control system be inspected?

Can nameplates and serial numbers be checked during inspection?

Is borescope inspection possible if required?

Can existing test reports and maintenance/preservation records be reviewed during inspection?

Price Basis

Please provide your best price and clearly indicate the commercial basis.



For example:



EXW

FCA

FOB

CPT

CIF

DAP

Please specify exactly where the quoted price applies.



Delivery Period

Please indicate the realistic delivery/readiness period.



If you state, for example, 2–3 months, please clarify what this means:



2–3 months until equipment is ready for shipment?

2–3 months to port of loading?

2–3 months to customers destination?

Please state the exact delivery point.



Condition and Operating History

Year of manufacture

New / unused / used

Actual operating hours

Number of starts

Factory test history

Site commissioning history

Has the turbine ever been synchronized to the grid?

Has it ever operated under load?

Current preservation/storage condition

Serial Numbers and Nameplates

Please provide available:



Turbine serial number

Generator serial number

Package serial number

Photos of all major nameplates

Scope of Supply

Please provide a detailed list of everything included in the offer, including:



Gas turbine

Gearbox

Generator

Gas fuel system

Liquid fuel / diesel system

Lubrication system

Starting system

Intake system

Exhaust system

Enclosure and ventilation

Fire detection/suppression system

Control system / HMI

Electrical equipment

Auxiliary systems

Spare parts

Documentation

Warranty

Please confirm whether you can provide the following warranty:



8,000 operating hours or 12 months after commissioning, but not less than 18 months after delivery.



Maintenance / Design Life

Please confirm the applicable maintenance and major inspection intervals.



Our customers requirement is approximately:



Inspection B: 24,000 operating hours

Inspection C: 48,000 operating hours

Please confirm whether these intervals are applicable to the offered SGT-300 configuration and provide supporting OEM documentation if available.



Commercial Information

Price

Incoterm

Payment terms

Availability

Reservation conditions, if any

Lead time

Packing

Transportation possibility

Installation / supervision

Commissioning

Training

Spare parts support

Please send us the technical specification, Scope of Supply, actual photos/videos, nameplate photos and all currently available supporting documentation.



This is an active project and the above technical points, especially the actual dual-fuel configuration, APG compatibility, equipment location, inspection possibility and price/delivery basis, are critical for the customers evaluation.



#technoh

---

---

---